text.skipToContent text.skipToNavigation

Downloading and upgrading the Linksys Small Business camera’s firmware

Linksys recommends that when upgrading the camera's firmware, use a computer within the camera's local network.? If you attempt to upgrade the camera's firmware from a remote location (i.e. using a computer outside of the camera's local network), the upgrade may fail.

NOTE: ?When you upgrade the camera's firmware, you may lose the settings you have saved previously.

?
Downloading the Firmware
Upgrading the Firmware
?
Downloading the Firmware
???????????
Step 1:
Click on the model number of your camera below to download its firmware:
?
LCAD03FLN
LCAD03VLNOD
LCAM0336OD
LCAB03VLNOD

QUICK TIP:? If you don’t know the model number of your camera, click on the How do I find my model number? link.? Make sure to take note of the hardware version beside your model number.
???????????
Step 2:

Click the hardware version of your device.
?
NOTE:? Select the appropriate hardware version for your camera.? The hardware version can be seen beside the model number of your camera.
?
User-added image

Step 3:
Click Download under Firmware to download the latest firmware.
?
User-added image

NOTE:? You will be prompted with the End User License Agreement, click AGREE.
?
User-added image

NOTE:? The file size differs for each device.? If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see a Pop-up blocked message in your browser’sInformation Bar.? If so, click the bar and select Temporarily Allow Pop-ups then click Download again.?
???????????
Step 4:

Click Save in the File Download dialog box that appears. ?Look for the?Save As dialog box, choose a location for the file like the Desktop and click Save. ?When the download is complete, click Close, if prompted.
?
NOTE:? Be sure to remember the file name and where you saved it.
?
Upgrading the Firmware
?
Step 1:
Access your camera’s web-based setup page.? To learn how, click here.
?
Step 2:
Click the Configuration tab.
?
User-added image

Step 3:
Scroll down to the Maintenance section in the left navigation and click Firmware Upgrade.
?
User-added image

Step 4:
Click Choose File and select the camera’s downloaded firmware.?
?
User-added image

Step 5:
Click Upgrade.? A prompt will then ask you for confirmation to upgrade the firmware, click OK.
?
IMPORTANT: ?DO NOT unplug the Ethernet cable or turn OFF the device during firmware upgrade. ?

Your Linksys Small Business camera should now be successfully updated.

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT

性交小说-性爱小说免费在线